Allcreate -> Pattern Imprinted Concrete
 
Home
About Allcrete
About PICS Ireland
Contact Us
Gallery
  Commercial
  Residential
Patterns
Colours
Steps and Special Features
The Process
Before & After
Wallcrete - Imprinted Walls
Picsbond - Stone Overlay
FAQs
Request a Brochure
Request a Quotation
Imprinted Concrete Supplies
Mat Hire
Tools
Sealer Products
Technical Support and Training

0
 

Allcrete -> The Pattern Imprinted Concrete Specialists

Your Questions Answered

Why choose Pattern Imprinted Concrete?
Pattern Imprinted Concrete is tough and durable therefore holding its look for many years. It is virtually maintenance free. Unlike other types of paving it does not sink or spread. It is weed free and will not melt on a hot day. It does not crumble or become loose nor will it fade as the colour and sealer are UV resistant.

How often do I have to reseal the concrete?
Like everything this depends on usage. Generally every 3-5 years. This is a very simple process and can be easily carried out by the customer.

How deep is the concrete poured?
Concrete is poured to a minumum of 100mm deep (4") - this is suitable for everyday traffic e.g. cars and small lorries. For heavier traffic we recommend 150mm deep (6"). For areas constantly used by heavy traffic e.g. roads we recommend 200mm deep (8").

What strength concrete is used?
We use a reinforced air entrained 320 concrete mix design which increased to 400 during winter months.

Is it necessary to cut joints in the concrete?
Yes. We recommend cutting joints at regular intervals. These are cut to a depth of 25% of the concrete slab. The reason for this is to reduce the chance of cracks occurring and should a crack appear it will follow the direction of the weakened points so that the crack rarely becomes visible.

Can I use my driveway while the work is being carried out?
We aim to create as little disturbance to you as is possible. When the ground has been prepared it is normally okay to park in your driveway. When the concrete is poured and printed we recommend it is left 48 hours before being used (depending on weather). When the surface is sealed it must be allowed to fully dry before being used, this depends on the weather e.g. 2 hours to a full day.

Does Allcrete work all year through?
Yes. Although during the winter months the process can take longer.

Can I power-wash my driveway?
Yes. As often as you like after the sealer has been applied.

Will the colour fade over time?
No. The colour will not fade as we use a colour surface hardener (CSH). This is trowelled into the concrete surface while wet and doubles the strength of the concrete surface. However the sealer does wear off over time so the colour might appear to have faded. This can be instantly restored to it's pristine condition by simply applying a fresh coat of sealer.

How many patterns and colours are available?
There are currently over 25 patterns and 25 colours. These can be mixed in any way to give numerous variations. See Patterns and Colours.

Is it possible to view work already carried out by Allcrete?
Yes of course. We offer a nationwide service and therefore have completed jobs across Ireland. Contact us and we will be happy to direct you to the job nearest to you.

 
  © 2012  Allcrete, Kingswood, Ballinea, Mullingar, Co. Westmeath
  Mob: 087-8261302 Tel: 044-9226080 / 01-4847818 Email: sales@allcrete.ie