Pattern Imprinted Concrete Specialists

Colour Surface Hardener
Used to colour and strengthen the surface of freshly poured concrete. Available in 25kg bags.

Antique Release Agent
This allows easy release of the printing mats from the concrete while giving a second colour/antique effect. Available in 10kg buckets.

Liquid Release Agent
A clear liquid which allows easy release of the printing mats from the wet concrete without giving extra colour. Available in 25ltr and 5ltr drums.

High Solids Sealer
Available in 25ltr and 5ltr drums. This is a colourless sealer which combine the benefits of sealing, hardening and enhancing the appearance of coloured concrete. This gives a mid-sheen finish.

Low Solid Sealer
Available in 25ltr and 5ltr drums. This is a colourless sealer which is used on concrete with a less porous surface. This is very suitable in warmer weather conditions as a base coat.

Xtraseal
Available in 25ltr drums. This is a colourless high solid sealer which is a more viscous alternative to our regular high solid sealer and can be used in colder weather conditions. This gives a gloss finish.

Mattsealer
Available in 25ltr drums. This is a colourless high solid sealer with matting agent which gives a matt finish.

Picseal
Available in 25ltr and 5ltr drums. This is a clear sealer used to seal the surface of the paving to improve the appearance of blocks, paving slabs and other concrete products. It provides a barrier to contaminants and will increase abrasion resistance and also protects the jointing sand from erosion and weed infestation.

Xylene
Available in 25ltr and 5ltr drums. This breaks down existing sealer to remove any blemishes causes by moisture etc.

Acid Wash
Available in 25ltr and 5ltr drums. This is used to remove excess powder release agent thus allowing the sealer to impregnate the surface of the concrete.

Wallgel
Available in 10kg buckets. An opaque gel which can be painted on any surface as a barrier. This protects the existing surface against concrete splashes, colour hardener and release agent. This is easily removed with a water jet.

Picscoat
Available in 20ltr buckets. This is a black waterbased tarmac restoration and refurbishment product. It recolours and rejuvenates existing areas of faded tarmac and asphalt. Severely inhibits weed, algae and moss growth. Helps to bond loose chippings and enables easy cleaning of oil spillages and fuel leaks etc.

Polythene
This is a light gauge plastic in 1000m2 rolls. Can be laid under the concrete slab prior to pouring to delay the drying out process allowing extra time for printing. Alternatively can be used to cover concrete to protect against rain damage/low temperatures.

Rhino Grip
This is a finely ground white powder which is added to PICS sealers. Typically used on inclined driveways, steps, patios etc to give extra grip.

Fibremesh
This is added to the wet concrete to increase strength and also used to reduce the concrete slump.

Colour Tints
Available in a selection of colours. Can be added to high solid/low solid sealer then thoroughly mixed and used as a last resort in repairing colour defects.

Man Hole Covers
Available in various sizes. These are recessed covers which the concrete is poured into or blocks fitted. They are used to replace the unsightly standard black plastic/metal covers.

Smith Colour Stains
Available in 940ml and 120ml bottles. These are extremely hardwearing water based stains which can be diluted to various strengths to give a unique finish. Suitable for application to interior and exterior concrete, brick, plaster and natural stone surfaces. Formulated as a user-friendly alternative to hazardous solvent and acid-based stains. A wide range of colours are available.